DOCUMENT PURPOSE
This document is a technical bulletin describing power consumption details for GXW4216, GXW4224, GXW4232 and GXW4248 & GXW4104/GXW4108, and HT841/HT881.
POWER DISSIPATION
Product | Version | Power Adapter Model | ||
Standby | Operating | Max Power | ||
Power (W) | Power (W) | Power (W) | ||
GXW4104 | 3.58 | 3.78 | 3.78 | |
GXW4108 | 3.91 | 4.27 | 4.27 | |
GXW41xx Power Dissipation and Advertisement
Product | Version | PoE Adapter Model | |||
Standby | Operating | Max Power | |||
Power (W) | Power (W) | 3RENs Loaded | Power (W) | ||
HT841 | V1.1 | 2.63 | 4.13 | Europe | / |
America | 6.38 | ||||
HT881 | 2.97 | 4.53 | Europe | / | |
America | 6.88 | ||||
HT8x1 Power Dissipation and Advertisement
Product | Version | Power Adapter Model | |||
Standby | Operating | Max Power | |||
Power (W) | Power (W) | 2RENs | Power (W) | ||
GXW4216 | V1.0A | 2.69 | 15.31 | Europe | 24.00 |
America | 26.40 | ||||
GXW4224 | 4.00 | 22.58 | Europe | 36.79 | |
America | 39.38 | ||||
GXW4232 | 4.15 | 29.59 | Europe | 43.70 | |
America | 46.02 | ||||
GXW4248 | 5.20 | 45.83 | Europe | 47.50 | |
America | 50.19 | ||||
GXW42xx V1 Power Dissipation and Advertisement
Product | Version | Power Adapter Model | ||
Idle State | Work State | Power Not to Exceed | ||
Power (W) | Power (W) | Power (W) | ||
GXW4216 | V2_V1.1 | 7.49 | 19.33 | 27.5 |
GXW4224 | V2_V1.1 | 12.03 | 21.8 | 44.52 |
GXW4232 | V2_V1.1 | 14.96 | 25.71 | 56.86 |
GXW4248 | V4.1A | 37.28 | 45.21 | 92.92 |
GXW42xx V2 Power Dissipation and Advertisement
- GXW4216/24/32 contain a FAN(MAX current :92mA), and GXW4248 contain two, FAN is shut off in test.
- GXW4216/24/32 and GXW4248 are IP-enabled devices in operation.
TEST CONDITION TERMINOLOGY
- Standby State
- The UUT (Unit Under Test) has completed the boot-up process.
- The SIP application was running PCMA codec with SRTP.
- No established call and no incoming ring.
- Operating State
- The UUT is set up as described in the Idle State.
- The maximum number of calls are established for each UUT.
- The Phone connected to UUT FXS port is working at handsfree mode and set to maximum volume.
- Connect a 600R resistor load for each FXS port of GXW4248 to simulate Off-Hook.
- 2US RENs loaded on each FXS port of UUT and ring established for all GXW4216/24/32v2.
- 1US RENs loaded on each FXS port of UUT and ring established for all GXW4248v2.
- FAN running.
- Max Power
- 2RENs loaded on each FXS port of UUT and ring established for all GXW42xx.
- 1RENs loaded on each FXS port of UUT and ring established for all GXW4248.
- Connect a 600R resistor loard for each FXS port of GXW4216/24/32/48v2 to simulated Off-Hook.
- FAN running.
