Power Dissipation and Advertisement
Product | Power Adapter (12VDC) | PoE (46.9VDC) | Class Advertisement (IEEE 802.3at) | |||||||
Idle State (W) | State | Work State (W) | Power Not to Exceed (W) | Idle State (W) | State | Work State (W) | Power Not to Exceed (W) | |||
802.3af | 802.3at | |||||||||
GXV3370 | 2.94 | RING | 6.88 | 13.17 | 3.78 | RING | 9.5 | 10.4 | 15.2 | 4 |
CALL | 7.15 | CALL | 8.56 | |||||||
USB | 8.73 | USB | 10.7 | |||||||
GXV3380 | 4.54 | RING | 8.09 | 16.97 | 5.2 | RING | 8.39 | 13.52 | 18.29 | 4
|
CALL | 8.13 | CALL | 8.51 | |||||||
USB | 10.86 | USB | 11.21 | |||||||
GXV3350 | 2.04 | RING | 5.59 | 11.69 | 8.1 | RING | 7.11 | 13.85 | 13.65 | 4 |
CALL | 5.63 | CALL | 7.33 | |||||||
USB | 7.96 | USB | 10.52 | |||||||
GXV3350 +1GBX20 | 3.55 | RING | 7.25 | 8.2 | 6.14 | RING | 9.15 | 11.05 | 10.92 | 4 |
CALL | 7.48 | CALL | 9.44 | |||||||
USB | / | USB | / | |||||||
GXV3350 +2GBX20 | 5.19 | RING | 9.14 | 9.65 | 7.15 | RING | 11.02 | 12.56 | 12.38 | 4 |
CALL | 9.54 | CALL | 11.65 | |||||||
USB | / | USB | / | |||||||
GXV3470 | 5.69 | RING | 6.38 | 16.56 | 6.56 | RING | 8.13 | / | 18.28 | 4 |
CALL | 5.72 | CALL | 7.81 | |||||||
USB | / | USB | / | |||||||
GXV3480 | 6.25 | RING | 6.72 | 18.12 | 7.5 | RING | 8.28 | / | 20.31 | 4 |
CALL | 6.09 | CALL | 8.13 | |||||||
USB | / | USB | / | |||||||
GXV3450 | 3.72 | RING | 5.38 | 16.41 | 5.16 | RING | 6.88 | / | 17.66 | 4 |
CALL | 5.21 | CALL | 5.31 | |||||||
USB | 7.88 | USB | 8.75 | |||||||
GXV3450(+1GBX20) | 4.91 | RING | 6.58 | 15.02 | 6.4 | RING | 8.38 | / | 16.28 | 4 |
CALL | 6.51 | CALL | 6.81 | |||||||
USB | / | USB | / |
Table 1: Power Dissipation and Advertisement
Notes:
- GBX20 is GBX20 EXT Extension Module.
- Class Advertisement Refer to Table 2 for IEEE 802.3af Classification at PD.
- The power of GBX20 can be supplied by GXV3350. When connecting 2 or more GBX20, must be supplied by its own supply power.
- GXV3370/3380 under the 802.3af power supply protocol, the software will shut down the USB interface.
- GXV3480 test maximum power consumption, add 800mA load per USB.
- GXV34x0 PoE is designed to support up to 802.3at (Class 4). So, 802.3af (Class 3) is not tested.
PD Power Classification
Class | Usage | Max Power Range used by the PD (phone) |
0 | Default | 0.44 to 12.95W |
1 | Optional | 0.44 to 3.84W |
2 | Optional | 3.84 to 6.49W |
3 | Optional | 6.49 to 12.95W |
4 | Not Allowed | Reserved for future use |
Table 2:PD Power Classification (IEEE 802.3at)
Class | Usage | Max Power Range used by the PD (phone) |
0 | Default | 0.44 to 12.95W |
1 | Optional | 0.44 to 3.84W |
2 | Optional | 3.84 to 6.49W |
3 | Optional | 6.49 to 12.95W |
4 | Optional | 12.95W to 25.5W |
Table 3:PD Power Classification (IEEE 802.3af)
Test Condition Terminology
The following test condition terminology was used in Table 1.
- Idle State
- The phone has completed the boot-up process.
- The SIP application was running PCMA codec with SRTP.
- The idle screen was shown on the LCD.
- LCD Backlight (Normal brightness).
- GXV3370 turns off LCD in this mode.
- Work State
- The phone was set up as described in the Idle State.
- RING State: The phone has an incoming call from another phone. The phone is ringing without answering it.
- CALL State: The phone is calling to another phone.
- USB State: The external USB device connected to the phone’s USB interface should be at maximum power.
- Power Not Exceed
- +nGBX20 means connected to n GBX20 Extension Module(s), n=1, 2, 3 or 4
- GBX20 works condition: All indicator LEDs are light on.
- External USB device in Max Power.
- GBX20 works condition: All indicator LEDs are lighting.
- Ring state or Called state.