DOCUMENT PURPOSE
This document is a technical bulletin describing power consumption details for GXW4216, GXW4224, GXW4232 and GXW4248 & GXW4104/GXW4108.
POWER DISSIPATION
Table 1: Power Dissipation and Advertisement
Product | Version | Power Adapter Model | ||
Standby | Operating | Max Power | ||
Power (W) | Power (W) | Power (W) | ||
GXW4104 | 3.58 | 3.78 | 3.78 | |
GXW4108 | 3.91 | 4.27 | 4.27 |
Product | Version | Power Adapter Model | |||
Standby | Operating | Max Power | |||
Power (W) | Power (W) | 2RENs Loaded | Power (W) | ||
GXW4216 | 2.69 | 15.31 | Europe | 24.00 | |
America | 26.40 | ||||
GXW4224 | 4.00 | 22.58 | Europe | 36.79 | |
America | 39.38 | ||||
GXW4232 | 4.15 | 29.59 | Europe | 43.70 | |
America | 46.02 | ||||
GXW4248 | V1.0A | 5.20 | 45.83 | Europe | 47.50 |
America | 50.19 |
TEST CONDITION TERMINOLOGY
The following test condition terminology was used in table 1.
- Standby State
- The UUT (Unit Under Test) has completed the boot-up process.
- The SIP application was running PCMA codec with SRTP.
- No established call and no incoming ring.
- Operating State
- The UUT is set up as described in the Idle State.
- The maximum number of calls are established for each UUT.
- The Phone connected to UUT FXS port is working at handsfree mode and set to maximum volume.
- Connect a 600R resistor load for each FXS port of GXW4248 to simulate Off-Hook.
- Max Power
- 2RENs loaded on each FXS port of UUT and ring established for all GXW42xx.
- 1RENs loaded on each FXS port of UUT and ring established for all GXW4248.
