UCM6300/A Series – Power Consumption

This document is a technical bulletin describing power consumption details for UCM63xx IPPBX Series.

UCM6xxx IPPBX series can be powered via

• Universal power supply: Input AC 100-240VAC 50/60Hz; Output 12VDC, 1.5A
• PoE: IEEE802.3af

TEST CONDITION TERMINOLOGY

The following test condition terminology was used in table 1.

• Idle State
  1. The IPPBX has completed the boot-up process.
  2. The SIP application is running PCMA codec with SRTP.
  3. No call state established or incoming ring.

• Work State
  1. The IPPBX is setup as described in the Idle State.
  2. The maximum number of calls are established for each Unit Under Test (UUT).
  3. USB port loaded at 200mA.

• Power Not To Exceed
  1. 1REN loaded on each FXS port of UUT and ring established.
  2. USB port loaded at 500mA.

Power Dissipation

Table 1: Power Dissipation and Advertisement