Power Dissipation and Advertisement
Product | Version | Power Adapter(5VDC) | POE （48VDC） | Class Advertisement （IEEE 802.3af） | ||||
Idle State | Work State | Power Not to Exceed | Idle State | Work State | Power Not to Exceed | |||
Power(W) | Power(W) | Power(W) | Power(W) | Power(W) | Power(W) | |||
GRP2612W | V1.5 | 0.99 | 1.59 | 2.15 | 1.52 | 2.30 | 2.97 | 1 |
GRP2612W | V2.1 | 1.20 | 1.79 | 1.88 | 1.74 | 1.82 | 2.11 | 1 |
GRP2612P/GRP2612G | V1.5 | 0.98 | 1.32 | 1.75 | 1.49 | 1.94 | 2.46 | 1 |
GRP2612 | V1.5 | 0.99 | 1.31 | 1.76 | N/A | N/A | N/A | N/A |
GRP2613 | V1.4 | 1.16 | 1.50 | 2.06 | 1.66 | 2.02 | 2.66 | 1 |
GBX20 | V1.2 | 1.07 | 1.25 | N/A | N/A | N/A | N/A | N/A |
GRP2601P | V1.3 | 1.05 | 1.41 | 1.41 | 1.56 | 1.81 | 1.81 | 1 |
GRP2603P | V1.1 | 1.02 | 1.38 | 1.38 | 1.47 | 1.74 | 1.74 | 1 |
GRP2604P | V1.2 | 1.01 | 1.11 | 1.20 | 1.65 | 1.84 | 1.88 | 1 |
GRP2601 | V2.1 | 1.29 | 1.55 | 1.55 | N/A | N/A | N/A | N/A |
GRP2604 | V1.2 | 1.06 | 1.14 | 1.14 | N/A | N/A | N/A | N/A |
GRP2602P/GRP2602G | V2.1 | 0.90 | 1.25 | 1.66 | 1.41 | 1.90 | 2.41 | 1 |
Table 1: Power Dissipation and Advertisement
Product | Version | Power Adapter(12VDC) | POE （48VDC） | Class Advertisement （IEEE 802.3af） | ||||
Idle State | Work State | Power Not to Exceed | Idle State | Work State | Power Not to Exceed | |||
Power(W) | Power(W) | Power(W) | Power(W) | Power(W) | Power(W) | |||
GRP2614 | V1.6 | 1.51 | 2.17 | 3.24 | 2.32 | 3.01 | 4.02 | 0 |
GRP2615 | V1.1 | 1.32 | 1.93 | 6.37 | 2.22 | 2.87 | 7.41 | 0 |
GRP2615+1*GBX20 | V1.2 | N/A | N/A | 4.56 | N/A | N/A | 5.56 | 0 |
GRP2616 | V1.1 | 1.39 | 2.04 | 6.12 | 2.49 | 2.90 | 7.85 | 0 |
GRP2614 | V2.1 | 1.50 | 2.91 | 2.91 | 2.51 | 3.42 | 3.42 | 0 |
GRP2615 | V2.1 | 2.16 | 3.54 | 8.89 | 2.98 | 4.26 | 10.21 | 0 |
GRP2616 | V2.1 | 2.53 | 3.55 | 8.95 | 2.99 | 4.30 | 10.32 | 0 |
GRP2624 | V1.1 | 1.45 | 2.44 | 7.41 | 2.62 | 3.19 | 9.21 | 0 |
GRP2634 | V1.1 | 1.46 | 2.85 | 7.96 | 2.82 | 3.57 | 9.47 | 0 |
GRP2670 | V1.2 | 4.33 | 5.02 | 9.39 | 4.69 | 5.97 | 10.64 | 0 |
GRP2650 | V1.1 | 2.25 | 3.39 | 9.24 | 3.44 | 4.36 | 11.56 | 0 |
GRP2650+1*GBX20 | V1.1 | N/A | N/A | 5.63 | N/A | N/A | 6.65 | 0 |
GRP2636 | V1.0 | 1.70 | 3.24 | 9.00 | 2.40 | 4.34 | 11.3 | 0 |
Table 2: Power Dissipation and Advertisement
Product | Version | Power Adapter (PSU 12VDC and USB 5V) | PoE (48VDC) | Class Advertisement (IEEE 802.3af) | ||||
Idle State (W) | Work State (W) | Power Not to Exceed (W) | Idle State (W) | Work State (W) | Power Not to Exceed (W) | |||
1*GBX20 (12VDC) | V1.2 | 1.06 | N/A | 3.95 | N/A | N/A | N/A | N/A |
3*GBX20 (12VDC) | V1.2 | 3.81 | N/A | 7.13 | N/A | N/A | N/A | N/A |
Table 3: Power Dissipation and Advertisement
- Class Advertisement Refer to Table 4 for IEEE 802.3af Classification at PD.
PD Power Classification
Class | Usage | Max Power Range used by the PD (Phone) |
0 | Default | 0.44 to 12.95W |
1 | Optional | 0.44 to 3.84W |
2 | Optional | 3.84 to 6.49W |
3 | Optional | 6.49 to 12.95W |
4 | Not Allowed | Reserved for future use (for example: IEEE802.3at) |
Table 4: PD Power Classification (IEEE 802.3af)
Test Condition Terminology
The following test condition terminology was used in Table 1.
- Idle State
The phone has completed the boot-up process.
The SIP application was running PCMA codec with SRTP.
The idle screen was shown on the LCD.
LCD Backlight (Normal brightness).
PD Power Classification (IEEE 802.3af).
- Work State
The phone was setup as described in the Idle State.
The maximum number of calls were established for each Unit Under Test (UUT).
The Handsfree mode was activated for each UUT and was set to maximum volume.
The LCD displayed at the Diagnostic screen during the test.
- Power Not Exceed
External USB device in Max Power.
Ring state or Called state.
