GWN7062 - Quick Installation Guide

  • Updated on September 15, 2022


The GWN7062 is a router powered by the latest Wi-Fi 6 (802.11ax) standard with 4 times increased data capacity in a dense environment to provide powerful signal strength and handle up to 256 devices in your growing network. It offers dual-band 2×2 MU-MIMO with DL/UL OFDMA technology, and combines both wireless Mesh networking and wired AP connection to expand Wi-Fi signal to every corner, including outdoor areas. Blazing-fast combined Wi-Fi speeds up to 1.77Gbps and 64-bit 1.2GHz quad-core processor powers smart product automation, smooth 4K UHD streaming, online gaming and more. The GWN7062 is supported by GWN Cloud, Grandstream’s cloud Wi-Fi management platform. With support for dual Gigabit WAN ports, mesh networks, advanced security and VPN, GWN7062 is an ideal Wi-Fi 6 router for wireless network deployment with small-to-medium sized business.

Package Contents

Figure 1: GWN7062 Package Contents

GWN7062 Ports

Figure 2: GWN7062 Ports




Used for USB storage device.

LAN 1/2/3

3x 10/100/1000Mbps Ethernet ports.


1x 10/100/1000Mbps Ethernet port.


1x 10/100/1000Mbps Ethernet port


Factory reset button.
Press for 5 seconds to reset factory default settings.


Power adapter connector (DC 12V, 1.5A)


Press for 5 seconds to pair all unpaired APs that can be found under the LAN port

Table 1: GWN7062 Ports

Connecting The GWN7062

Power the GWN7062

GWN7052 can be powered on using the right PSU (DC 12V, 1.5A).

Figure 3: Power the GWN7062

Connect to the Internet

Connect the WAN port to an optical fiber broadband modem, ADSL broadband modem or community broadband interface.

Figure 4: Connect to the internet

Connect to GWN7062 Default Network

Figure 5: Connect to Default Network

Note: SSID’s default password information is printed on the MAC tag at the bottom of the unit.

Accessing the configuration interface

Now that you are connected to the GWN7062’s SSID or to LAN port with network cable, you can access into its configuration interface with: “” or default IP address “” then enter password to login.

Note: GWN7062’s default password information is printed on the MAC tag at the bottom of the unit.

Figure 6: GWN7062 login page

  • It is customer’s responsibility to ensure compliance with local regulations for frequency bands, transmit power and others.
  • To manage GWN7062 over cloud, please refer to


  • Do not attempt to open, disassemble, or modify the device.
  • Do not use a third party power adapter.
  • Do not expose this device to temperatures outside range of 0 °C to 50 °C for operating and -30 °C to 60 °C for storage.
  • Do not expose the GWN7062 to environments outside of the following humidity range: 10-90% RH (non-condensing).
  • Do not power cycle your GWN7062 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.

The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed here:
To obtain a CD with GPL source code information please submit a written request to

Refer to online documents and FAQ for more detailed information:

For Certification, Warranty and RMA information,
please visit

Was this article helpful?

Related Articles

Need Support?
Can’t find the answer you’re looking for? Don’t worry we’re here to help!
Contact Support

Leave a Comment