GWN7052 - Quick Installation Guide

  • Updated on September 14, 2022


The GWN7052 is a secure dual-band router powered by 802.11ac WiFi technology. It features a dual-core 880MHz processor to provide Wi-Fi speeds of up to 1.266 Gbps to 100 wireless devices, allowing the GWN7052 to power smart office, smooth 4K Ultra HD streaming, web meetings, video conferences and more. It supports VPN to allow remote employees to securely connect to the corporate network from home or branch offices. The GWN7052 also provides enterprise-grade security features to ensure secure Wi-Fi and VPN access, including unique security certificates and random default passwords. To ensure easy installation and management, the GWN7052 includes a built-in controller embedded within the product’s web user interface. It is also supported by GWN.Cloud, Grandstream’s free cloud Wi-Fi management platform. By combining accelerated Wi-Fi speeds, mesh networking and wired AP connections with advanced features including VPN and advanced QoS, the GWN7052 is the ideal router for a growing home and business network.

Package Contents

Figure 1: Package Contents

GWN7052 Ports

Figure 2: GWN7052 Ports




1x 10/100/1000Mbps Ethernet port.

LAN 1/2/3/4

4x 10/100/1000Mbps Ethernet ports.


Used for USB storage device.


Power adapter connector (DC 12V, 1A)


Factory reset pinhole.
Press for 5 seconds to reset factory default settings.

Table 1: GWN7052 Ports

Connecting The GWN7052

Power the GWN7052

GWN7052 can be powered on using the right PSU (DC 12V, 1A).

Figure 3: Power the GWN7052

Connect to the Internet

Connect the WAN port to an optical fiber broadband modem, ADSL broadband modem or community broadband interface.

Figure 4: Connect to the internet

Connect to GWN7052 Default Network

Figure 5: Connect to Default Network

Note: SSID’s default password information is printed on the MAC tag at the bottom of the unit.

Accessing the configuration interface

Now that you are connected to the GWN7052’s SSID or to LAN port with network cable, you can access into its configuration interface with: “” or default IP address “” then enter password to login.

Note: GWN7052’s default password information is printed on the MAC tag at the bottom of the unit.

Figure 6: GWN7052 login page

  • It is customer’s responsibility to ensure compliance with local regulations for frequency bands, transmit power and others.
  • To manage GWN7052 over cloud, please refer to


  • Do not attempt to open, disassemble, or modify the device.
  • Do not use a third party power adapter.
  • Do not expose this device to temperatures outside range of 0 °C to 50 °C for operating and -10 °C to 60 °C for storage.
  • Do not expose the GWN7052 to environments outside of the following humidity range: 10-90% RH (non-condensing).
  • Do not power cycle your GWN7052 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.

The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_license. It can also be accessed here:
To obtain a CD with GPL source code information please submit a written request to

Refer to online documents and FAQ for more detailed information:

For Certification, Warranty and RMA information,
please visit

Was this article helpful?

Related Articles

Need Support?
Can’t find the answer you’re looking for? Don’t worry we’re here to help!
Contact Support

Leave a Comment